Technique Intensive: Flush Setting
with Chapin Dimond
Date: Saturday, September 7, 2019
Time: 9 am to 5 pm Cost: $145 for BoMA members $195 for non-members Materials fee: $70 payable in class Location: BoMA Studio 4919 Broadway St, Unit 14 Boulder, CO 80304 |

Class Description
Do you want to add a little sparkle to your work? In this technique-based, 1 day workshop, we'll learn and practice flush setting (with ball burs) and gypsy setting (with hart burs) round faceted stones in both a brass ring and a copper plate (Students may bring sterling silver to practice on, optional). We will discuss common problems and techniques. In this class you will learn how to flush set and gypsy set round faceted stones. Students will also learn how to make flush setting tools/burnishers and maintain them, along with other tricks.
About the Instructor
Chapin Dimond is a full-time professional metalsmith and jeweler. In 2003 he discovered the magic of metalsmithing. From Metropolitan State College of Denver, he earned a BFA in Art: Jewelry Design and Metalsmithing. Chapin is a Colorado native inspired by nature and the magic of metals. Metalsmithing is the process of telling stories through metal, releasing the inner “feeling” of what metal wants to be. Swing that hammer, light that torch, and see that magic happen. He teaches several classes here at BoMA. He continuously expands his knowledge through taking class, practicing, and teaching. To see Chapin’s work, visit his website, www.cdimond.com.
Prerequisites
Level I Metalsmithing for Jewelry or two years experience and be able to control and use a flex shaft
Tools and equipment students should bring
Dividers
Calipers (digital or dial is recommended)
Optivisor (BoMA has some at 3x if you want stronger bring your own, I like 7x)
Loop 10x
400 grit sanding stick
Any jewelry tools you currently have in your toolbox (optional)
Sterling Silver practice sheet 14ga or 12ga (optional)
Cash or check made out to Chapin Dimond for materials kit $70*
Materials fee* $70
Lick stick
Copper practice sheet
Brass practice ring
CZs (1.5mm and 2.5mm)
Ball burs
Hart burs
Drill bits
Diamond Leather pad
Pin vice with 2 pre-made burnishers
Setting plier
Cut off wheel and mandrel
Stone tray
Beeswax
Other necessary tools
*Materials kit purchase is required for all BoMA workshops. The kit insures all students have the same tools and materials require to learn the technique and allows the instructor and the students to focus on the technique rather than the materials.
MAXIMUM NUMBER OF STUDENTS: 8
Students will be required to sign a waiver. Participants must be 18 or older.
CANCELLATION POLICY
You may cancel up to 14 days prior to the start of the class and receive a full refund, less $25 processing. To cancel, send an email to info@bouldermetalsmiths.com.
Cancellations less than 14 days prior to the start date will not be refunded.
In the event we have to cancel a class, you will be notified prior to the start date and will be issued a full refund.
Registration is not transferrable. You may not sell your seat to another student.
By clicking on the “I’m going” button and paying the registration fee, you are agreeing to this cancellation policy.
No Exceptions.
Registration open now
Do you want to add a little sparkle to your work? In this technique-based, 1 day workshop, we'll learn and practice flush setting (with ball burs) and gypsy setting (with hart burs) round faceted stones in both a brass ring and a copper plate (Students may bring sterling silver to practice on, optional). We will discuss common problems and techniques. In this class you will learn how to flush set and gypsy set round faceted stones. Students will also learn how to make flush setting tools/burnishers and maintain them, along with other tricks.
About the Instructor
Chapin Dimond is a full-time professional metalsmith and jeweler. In 2003 he discovered the magic of metalsmithing. From Metropolitan State College of Denver, he earned a BFA in Art: Jewelry Design and Metalsmithing. Chapin is a Colorado native inspired by nature and the magic of metals. Metalsmithing is the process of telling stories through metal, releasing the inner “feeling” of what metal wants to be. Swing that hammer, light that torch, and see that magic happen. He teaches several classes here at BoMA. He continuously expands his knowledge through taking class, practicing, and teaching. To see Chapin’s work, visit his website, www.cdimond.com.
Prerequisites
Level I Metalsmithing for Jewelry or two years experience and be able to control and use a flex shaft
Tools and equipment students should bring
Dividers
Calipers (digital or dial is recommended)
Optivisor (BoMA has some at 3x if you want stronger bring your own, I like 7x)
Loop 10x
400 grit sanding stick
Any jewelry tools you currently have in your toolbox (optional)
Sterling Silver practice sheet 14ga or 12ga (optional)
Cash or check made out to Chapin Dimond for materials kit $70*
Materials fee* $70
Lick stick
Copper practice sheet
Brass practice ring
CZs (1.5mm and 2.5mm)
Ball burs
Hart burs
Drill bits
Diamond Leather pad
Pin vice with 2 pre-made burnishers
Setting plier
Cut off wheel and mandrel
Stone tray
Beeswax
Other necessary tools
*Materials kit purchase is required for all BoMA workshops. The kit insures all students have the same tools and materials require to learn the technique and allows the instructor and the students to focus on the technique rather than the materials.
MAXIMUM NUMBER OF STUDENTS: 8
Students will be required to sign a waiver. Participants must be 18 or older.
CANCELLATION POLICY
You may cancel up to 14 days prior to the start of the class and receive a full refund, less $25 processing. To cancel, send an email to info@bouldermetalsmiths.com.
Cancellations less than 14 days prior to the start date will not be refunded.
In the event we have to cancel a class, you will be notified prior to the start date and will be issued a full refund.
Registration is not transferrable. You may not sell your seat to another student.
By clicking on the “I’m going” button and paying the registration fee, you are agreeing to this cancellation policy.
No Exceptions.
Registration open now